Service-Level-Driven Service Parts Planning for Microsoft Dynamics BC or F&SC is a four-step process that extends beyond simplified forecasting and rule-of-thumb safety stocks. It provides service parts planners with data-driven, risk-adjusted decision support.

The math to determine this level of planning simply does not exist in D365 functionality.  It requires math and AI that passes thousands of times through calculations for each part and part center (locations).  Math and AI like this are unique to Smart.  To understand more, please read on. 

Step 1. Ensure that all stakeholders agree on the metrics that matter. 

All participants in the service parts inventory planning process must agree on the definitions and what metrics matter most to the organization. Service Levels detail the percentage of time you can completely satisfy required usage without stocking out. Fill Rates detail the percentage of the requested usage that is immediately filled from stock. (To learn more about the differences between service levels and fill rate, watch this 4-minute lesson here.) Availability details the percentage of active spare parts with an on-hand inventory of at least one unit. Holding costs are the annualized costs of holding stock accounting for obsolescence, taxes, interest, warehousing, and other expenses. Shortage costs are the cost of running out of stock, including vehicle/equipment downtime, expedites, lost sales, and more. Ordering costs are the costs associated with placing and receiving replenishment orders.

Step 2. Benchmark historical and predicted current service level performance.

All participants in the service parts inventory planning process must hold a common understanding of predicted future service levels, fill rates, and costs and their implications for your service parts operations. It is critical to measure both historical Key Performance Indicators (KPIs) and their predictive equivalents, Key Performance Predictions (KPPs).  Leveraging modern software, you can benchmark past performance and leverage probabilistic forecasting methods to simulate future performance.  Virtually every Demand Planning solution stops here.  Smart goes further by stress-testing your current inventory stocking policies against all plausible future demand scenarios.  It is these thousands of calculations that build our KPPs.  The accuracy of this improves D365’s ability to balance the costs of holding too much with the costs of not having enough. You will know ahead of time how current and proposed stocking policies are likely to perform.

Step 3. Agree on targeted service levels for each spare part and take proactive corrective action when targets are predicted to miss. 

Parts planners, supply chain leadership, and the mechanical/maintenance teams should agree on the desired service level targets with a full understanding of the tradeoffs between stockout risk and inventory cost.  A call out here is that our D365 customers are almost always stunned by the stocking levels difference between 100% and 99.5% availability.   With the logic for nearly 10,000 scenarios that half a percent outage is almost never hit.   You achieve full stocking policy with much lower costs.   You find the parts that are understocked and correct those.  The balancing point is often a 7-12% reduction in inventory costs. 

This leveraging of what-if scenarios in our parts planning software gives management and buyers the ability to easily compare alternative stocking policies and identify those that best meet business objectives.  For some parts, a small stock out is okay.  For others, we need that 99.5% parts availability.  Once these limits are agreed upon, we use the Power of D365 to optimize inventory using D365 core ERP as it should be.   The planning is automatically uploaded to engage Dynamics with modified reorder points, safety stock levels, and/or Min/Max parameters.  This supports a single Enterprise center point, and people are not using multiple systems for their daily parts management and purchasing.

Step 4. Make it so and keep it so. 

Empower the planning team with the knowledge and tools it needs to ensure that you strike agreed-upon balance between service levels and costs.  This is critical and important.  Using Dynamics F&SC or BC to execute your ERP transactions is also important.  These two Dynamics ERPs have the highest level of new ERP growth on the planet.  Using them as they are intended to be used makes sense.   Filling the white space for the math and AI calculations for Maintenance and Parts management also makes sense.  This requires a more complex and targeted solution to help.  Smart Software Inventory Optimization for EAM and Dynamics ERPs holds the answer.    

Remember: Recalibration of your service parts inventory policy is preventive maintenance against both stockouts and excess stock.  It helps costs, frees capital for other uses, and supports best practices for your team. 

Extend Microsoft 365 F&SC and AX with Smart IP&O

To see a recording of the Microsoft Dynamics Communities Webinar showcasing Smart IP&O, register here:

https://smartcorp.com/inventory-planning-with-microsoft-365-fsc-and-ax/

Microsoft Dynamics 365 F&SC and AX can manage replenishment by suggesting what to order and when via reorder point-based inventory policies.  A challenge that customers face is that efforts to maintain these levels are very detailed oriented and that the ERP system requires that the user manually specify these reorder points and/or forecasts.  As an alternative, many organizations end up generating inventory policies by hand using Excel spreadsheets or using other ad hoc approaches.

These methods are time-consuming and both likely result in some level of inaccuracy.  As a result, the organization will end up with excess inventory, unnecessary shortages, and a general mistrust of their software systems. In this article, we will review the inventory ordering functionality in AX / D365 F&SC, explain its limitations, and summarize how Smart Inventory Planning & Optimization can help improve a company’s cash position.   This is accomplished by reduced inventory, minimized and controlled stockouts.   Use of Smart Software delivers predictive functionality that is missing in Dynamics 365.

Microsoft Dynamics 365 F&SC and AX Replenishment Policies

In the inventory management module of AX and F&SC, users can manually enter planning parameters for every stock item. These parameters include reorder points, safety stock lead times, safety stock quantities, reorder cycles, and order modifiers such as supplier imposed minimum and maximum order quantities and order multiples. Once entered, the ERP system will reconcile incoming supply, current on hand, outgoing demand, and the user defined forecasts and stocking policies to net out the supply plan or order schedule (i.e., what to order and when).

There are 4 replenishment policy choices in F&SC and AX:  Fixed Reorder Quantity, Maximum Quantity, Lot-For-Lot and Customer Order Driven.

• Fixed Reorder Quantity and Max are reorder point-based replenishment methods. Both suggest orders when on hand inventory hits the reorder point. With fixed ROQ, the order size is specified and will not vary until changed. With Max, order sizes will vary based on stock position at time of order with orders being placed up to the Max.
• Lot-for Lot is a forecasted based replenishment method that pools total demand forecasted over a user defined time frame (the “lot accumulation period”) and generates an order suggestion totaling the forecasted quantity. So, if your total forecasted demand is 100 units per month and the lot accumulation period is 3 months, then your order suggestion would equal 300 units.
• Order Driven is a make to order based replenishment method. It doesn’t utilize reorder points or forecasts. Think of it as a “sell one, buy one” logic that only places orders after demand is entered.

Limitations

Every one of F&SC / AX replenishment settings must be entered manually or imported through custom uploads created by customers.  There simply isn’t any way for users to natively generate any inputs (especially not optimal ones). The lack of credible functionality for unit level forecasting and inventory optimization within the ERP system is why so many AX and F&SC users are forced to rely on spreadsheets for planning and then manually set the parameters the ERP needs.  In reality, most planners end up manually set demand forecasts and reordering.

And when they can use spread sheets, they often rely on wide rule of thumb methods that results in using simplified statistical models.  Once calculated in the spread sheet these must be loaded into F&SC/AX.  They are often either loaded via cumbersome file imports or manually entered.   Because of the time and effort, it takes to build these, companies do not frequently update these numbers.

Once these are set in place, organizations tend to employ a reactive approach to changes.  The only time a buyer/planner reviews inventory policy is annually or at the time of purchases or manufacturing.   Some firms will also react after encountering problems with inventory levels being short (or too high).  Managing this in AX and F&AS requires manual interrogation to review history, calculate forecasts, assess buffer positions, and to recalibrate.

Microsoft recognizes these constraints in their core ERPs and understands the significant challenges to customers.  In response Microsoft has positioned forecasting under their AI Azure stack.  This method is outside of the core ERPs.  It is offered as a tool set for Data Scientists to use in defining custom complex statistics and calculations as a company wishes.  This is in addition to some basic simple calculations as a starting point are currently in their start up phases of development.  While this may hold long term gains, currently this method means customers start from near scratch and define what Microsoft currently called ‘experiments’ to gauge demand planning.

The bottom line is that customers face large challenges in getting the Dynamics stack itself to help solve these problems.  The result is for CFOs to have less cash available for what they need and for Sales Execs to have sales opportunities unfilled and a potential loss of sales because the firm can’t ship the goods the customer wants.

Get Smarter

Wouldn’t it be better to simply leverage a best of breed add-on for demand planning; and a best of breed inventory optimization solution to manage and balance costs and fulfilment levels?  Wouldn’t it be better to be able to do this on a daily or weekly basis to make your decisions closest to the need, preserving cash while meeting sales demand?

Imagine having a bidirectional integration with AX and F&AS so this all operates easily and quickly.   One where:

• you could automatically recalibrate policies in frequent planning cycles using field proven, cutting-edge statistical models,
• you would be able to calculate demand forecasts that account for seasonality, trend, and cyclical patterns,
• You would automatically leverage optimization methods that prescribe the most profitable stocking policies and service levels that consider the real costs of carrying inventory and stock outages, giving you a full economic picture,
• You could free up cash for use within the company and manage your inventory levels to improve order fulfillment at the same time as you free this cash.
• you would have safety stocks and inventory levels that would account for demand and supply variability, business conditions, and priorities,
• you’d be able to target specific service levels by groups of products, customers, warehouses, or any other dimension you selected,
• you increase overall company profit and balance sheet health.

Extend Microsoft 365 F&SC and AX with Smart IP&O

To see a recording of the Microsoft Dynamics Communities Webinar showcasing Smart IP&O, register here:

https://smartcorp.com/inventory-planning-with-microsoft-365-fsc-and-ax/

Belmont, Mass., December 2022 –  Smart Software is pleased to announce that Co-Founder Dr. Thomas R. Willemain’s article “Managing Inventory amid Regime Change” has won 1st place in the Forecasting category of the 2022 Supply Chain Brief MVP Awards.

“Regime change” is a statistical term meaning a major change in the character of the demand for an inventory item. An item’s demand history is the fuel that powers demand planners’ forecasting machines. In general, the more fuel the better, giving us a better fix on the average level,  the shape of any seasonality pattern, and the size and direction of any trend. But there is one big exception to the rule that “more data is better data.” If there is a major shift in your business and new demand doesn’t look like old demand, then old data become dangerous.

Read the MVP Award winner article here  https://smartcorp.com/inventory-optimization/managing-inventory-amid-regime-change/

Supply Chain Brief brings together the best content from hundreds of industry thought leaders. This MVP Award recognizes the Most Valuable Post as judged by Supply Chain Brief’s audience, award committee, and social media. Smart Software has been recognized to provide the highest value to industry professionals and useful information that is strategic in nature. https://www.supplychainbrief.com/mvp-awards/2022-SCB-MVP-AWARDS/forecasting

Dr. Thomas R. Willemain is Co-Founder and Senior VP for Research at Smart Software.  He has been a professor at MIT and the Harvard Kennedy School of Government and is now Professor Emeritus of Industrial and Systems Engineering at Rensselaer Polytechnic Institute.  Tom was a Distinguished Visiting Professor at the FAA and supported the Intelligence Community as Expert Statistical Consultant (GS15) in NSA’s Mathematics Research Group and later at IDA’s Center for Computing Sciences.  He holds degrees from Princeton University (BSE, summa cum laude) and Massachusetts Institute of Technology (MS and PhD), all in Electrical Engineering.

About Smart Software, Inc.
Founded in 1981, Smart Software, Inc. is a leader in providing businesses with enterprise-wide demand forecasting, planning and inventory optimization solutions. Smart Software’s demand forecasting and inventory optimization solutions have helped thousands of users worldwide, including customers at mid-market enterprises and Fortune 500 companies, such as Disney, Arizona Public Service, and Ameren. Smart Inventory Planning & Optimization gives demand planners the tools to handle sales seasonality, promotions, new and aging products, multi-dimensional hierarchies, and intermittently demanded service parts and capital goods items. It also provides inventory managers with accurate estimates of the optimal inventory and safety stock required to meet future orders and achieve desired service levels. Smart Software is headquartered in Belmont, Massachusetts, and can be found online at www.smartcorp.com.