Customer as Teacher

Our customers are great teachers who have always helped us bridge the gap between textbook theory and practical application of forecasting and demand planning. Our latest bit of schooling concerns “blanket orders” and how to account for them as part of the demand planning process. 

Expanding the Inventory Theory Textbook

Textbook inventory theory focuses on the three most used replenishment policies: (1) Periodic review order-up-to policy, designated (T, S) in the books (2) Continuous review policy with fixed order quantity, designated (R, Q) and (3) Continuous review order-up-to policy, designated (s, S) but usually called “Min/Max.” Our customers have pointed out that their actual ordering process often includes frequent use of “blanket orders.” This blog focuses on how to incorporate blanket orders into the demand planning process and details how to adjust stocking targets accordingly.

Demand Planning with Blanket Orders is Different

Blanket orders are contracts with suppliers for fixed replenishment quantities arriving at fixed intervals. For example, you might agree with your supplier to receive 20 units every 7 days via a blanket order rather than 60 to 90 units every 28 days under the Periodic Review policy. Blanket orders contrast even more with the Continuous Review policies, under which both order schedules and order quantities are random.  In general, it is efficient to build flexibility into the restocking process so that you order only what you need and only order when you need it. By that standard, Min/Max should make the most sense and blanket policies should make the least sense.

The Case for Blanket Policies

However, while efficiency is important, it is never the only consideration. One of our customers, let’s call them Company X, explained the appeal of blanket policies in their circumstances. Company X makes high-performance parts for motorcycles and ATV’s. They turn raw steel into cool things.  But they must deal with the steel. Steel is expensive. Steel is bulky and heavy. Steel is not something conjured overnight on a special-order basis. The inventory manager at Company X does not want to place large but random-sized orders at random times. He does not want to baby-sit a mountain of steel. His suppliers do not want to receive orders for random quantities at random times. And Company X prefers to spread out its payments. The result: Blanket orders.

The Fatal Flaw in Blanket Policies

For Company X, blanket orders are intended to even out replenishment buys and avoid unwieldy buildups of piles of steel before they are ready for use. But the logic behind continuous review inventory policies still applies. Surges in demand, otherwise welcome, will occur and can create stockouts. Likewise, pauses in demand can create excess demand. As time goes on, it becomes clear that a blanket policy has a fatal flaw: only if the blanket orders exactly match the average demand can they avoid runaway inventory in either direction, up or down. In practice, it will be impossible to exactly match average demand. Furthermore, average demand is a moving target and can drift up or down.

How to Incorporate Blanket Orders when Demand Planning 

A blanket policy does have advantages, but rigidity is its Achilles heel.  Demand planners will often improvise by adjusting future orders to handle changes in demand but this doesn’t scale across thousands of items.  To make the inventory replenishment policy robust against randomness in demand, we suggest a hybrid policy that begins with blanket orders but retains flexibility to automatically (not manually) order additional supply on an as-need basis. Supplementing the blanket policy with a Min/Max backup provides for adjustments without manual intervention. This combination will capture some of the advantages of blanket orders while protecting customer service and avoiding runaway inventory.

Designing a demand planning process that accounts for blanket orders properly requires choice of four control parameters. Two parameters are the fixed size and fixed timing of the blanket policy. Two more are the values of Min and Max. This leaves the inventory manager facing a four-dimensional optimization problem.  Advanced inventory optimization software will make it possible to evaluate choices for the values of the four parameters and to support negotiations with suppliers when crafting blanket orders.

Recently, I had an interesting conversation with an inventory manager and the VP Finance. We were discussing the benefits of being able to automatically optimize both reorder points and order quantities. The VP Finance was concerned that given their large supplier required minimum order quantities, they would not be able to benefit.  He said his suppliers held all the power, forcing him to accept massive minimum order quantities and tying his hands. While he felt bad about this, he saw a silver lining: He didn’t have to do any planning. He would accept a large inventory investment, but his customer service levels would be exceptional.  Perhaps the large inventory investment was assumed to be the cost of doing business.

I pushed back and pointed out that he was not as powerless as he felt. He still had control of the other half of the procurement process: while he couldn’t control how much to order, he could control when to order by adjusting the reorder point. In other words, there is always room for careful quantitative analysis in inventory management, even when you have one hand tied behind your back.

An Example

To put some numbers behind my argument, I created a scenario then analyzed it using our methodology to show how consequential it can be to use inventory optimization software even in constrained situations. In this scenario, item demand averages 2.2 units per day but varies significantly by day of week. Let’s say the imaginary supplier insists on a minimum order quantity of 500 units (way out of proportion to demand) and fills replenishment orders in either three days or ten days in equal proportions (quite inconsistent). To spread the blame around, let’s also suppose that the imaginary supplier’s imaginary customer uses a foolish rule that the reorder point should be 10% of the minimum order quantity. (Why this rule? Too many companies use simple/simplistic rules of thumb in lieu of proper analysis.)

So, we have a base case in which the order quantity is 500 units, and the reorder point is 50 units. In this case, the fill rate is 100%, but the average number of units on hand is a whopping 330. If the customer would simply lower the reorder point from 50 to 15, the fill rate would still be 99.5%, but the average stock on hand would drop by 11% to 295 units. Using the one hand not tied behind his back, the inventory manager could cut his inventory investment by more than 10%, which would be a noticeable win.

Incidentally, if the minimum order quantity were abolished, the customer would be free to arrive at a new and much better solution. Setting the order quantity to 45 and the reorder point to 25 would achieve a 99% fill rate at the cost of a daily on-hand level of only 35 units: nearly a 90% reduction in inventory investment: a major improvement over the status quo.

Postscript

These calculations are possible using our software, which can make visible the otherwise unknown relationships between inventory system design choices (e.g., order quantity and reorder point) and key performance indicators (e.g., average units on hand and fill rate).  Armed with this ability to conduct these calculations, alternative arrangements with the supplier may now be considered. For example, what if, in exchange for paying a higher price per unit, the supplier agreed to a lower MOQ. Using the software to conduct an analysis of the key performance indicators using the “what if” costs and MOQs would reveal the cost per unit and MOQ that would be needed to develop a more profitable deal.   Once identified, all parties stand to benefit.  The supplier now generates a better margin on sales of its products, and the buyer holds considerably less inventory yielding a holding cost reduction that dwarfs the added cost per unit.  Everyone wins.

You know the situation: You work out the best way to manage each inventory item by computing the proper reorder points and replenishment targets, then average demand increases or decreases, or demand volatility changes, or suppliers’ lead times change, or your own costs change. Now your old policies (reorder points, safety stocks, Min/Max levels, etc.)  have been obsoleted – just when you think you’d got them right.   Leveraging advanced planning and inventory optimization software gives you the ability to proactively address ever-changing outside influences on your inventory and demand.  To do so, you’ll need to regularly recalibrate stocking parameters based on ever-changing demand and lead times.

Recently, some potential customers have expressed concern that by regularly modifying inventory control parameters they are introducing “noise” and adding complication to their operations. A visitor to our booth at last week’s Microsoft Dynamics User Group Conference commented:

“We don’t want to jerk around the operations by changing the policies too often and introducing noise into the system. That noise makes the system nervous and causes confusion among the buying team.”

This view is grounded in yesterday’s paradigms.  While you should generally not change an immediate production run, ignoring near-term changes to the policies that drive future production planning and order replenishment will wreak havoc on your operations.   Like it or not, the noise is already there in the form of extreme demand and supply chain variability.  Fixing replenishment parameters, updating them infrequently, or only reviewing at the time of order means that your Supply Chain Operations will only be able to react to problems rather than proactively identify them and take corrective action.

Modifying the policies with near-term recalibrations is adapting to a fluid situation rather than being captive to it.  We can look to this past weekend’s NFL games for a simple analogy. Imagine the quarterback of your favorite team consistently refusing to call an audible (change the play just before the ball is snapped) after seeing the defensive formation.  This would result in lots of missed opportunities, inefficiency, and stalled drives that could cost the team a victory.  What would you want your quarterback to do?

Demand, lead times, costs, and business priorities often change, and as these last 18 months have proved they often change considerably.  As a Supply Chain leader, you have a choice:  keep parameters fixed resulting in lots of knee-jerk expedites and order cancellations, or proactively modify inventory control parameters.  Calling the audible by recalibrating your policies as demand and supply signals change is the right move.

Here is an example. Suppose you are managing a critical item by controlling its reorder point (ROP) at 25 units and its order quantity (OQ) at 48. You may feel like a rock of stability by holding on to those two numbers, but by doing so you may be letting other numbers fluctuate dramatically.  Specifically, your future service levels, fill rates, and operating costs could all be resetting out of sight while you fixate on holding onto yesterday’s ROP and OQ.  When the policy was originally determined, demand was stable and lead times were predictable, yielding service levels of 99% on an important item.   But now demand is increasing and lead times are longer.  Are you really going to expect the same outcome (99% service level) using the same sets of inputs now that demand and lead times are so different?  Of course not.  Suppose you knew that given the recent changes in demand and lead time, in order to achieve the same service level target of 99%, you had to increase the ROP to 35 units.  If you were to keep the ROP at 25 units your service level would fall to 92%.  Is it better to know this in advance or to be forced to react when you are facing stockouts?

What inventory optimization and planning software does is make visible the connections between performance metrics like service rate and control parameters like ROP and ROQ. The invisible becomes visible, allowing you to make reasoned adjustments that keep your metrics where you need them to be by adjusting the control levers available for your use.  Using probabilistic forecasting methods will enable you to generate Key Performance Predictions (KPPs) of performance and costs while identifying near-term corrective actions such as targeted stock movements that help avoid problems and take advantage of opportunities. Not doing so puts your supply chain planning in a straightjacket, much like the quarterback who refuses to audible.

Admittedly, a constantly-changing business environment requires constant vigilance and occasional reaction. But the right inventory optimization and demand forecasting software can recompute your control parameters at scale with a few mouse clicks and clue your ERP system how to keep everything on course despite the constant turbulence.  The noise is already in your system in the form of demand and supply variability.  Will you proactively audible or stick to an older plan and cross your fingers that things will work out fine?